Materials Used in Ornamental Turning
Pear
Pear

Pear
Picture courtesy Sam Seaton

Ornamentally Turned Objects

This is an excellent wood for ornamental turning, and gets used often. The wood is easily worked, and it holds shapes well. But it is the color, and the relative plain-ness of the wood which is why it is chosen for ornamental turning.

Ornamental Turning Notes

It has reasonable availability, and is not costly. It does have problems with cracking like with other fruit woods (though not as bad as some). Care needs to be taken in the drying if this is acquired whilst still wet.

Working the wood is easy, but requires some pre-planning. As with other fruit woods, the work will easily "burn", so you will need to decrease the contact time with the cutter. This can be achieved by slowing the cutter speed (i.e., slowing down the overhead drive), or by increasing the spindle drive speed (I typically run this 40-50% faster), or both. I have also found that a very sharp cutter will make a difference.

Finishing

Finishing this is probably not necessary. Most fruit woods leave a wonderful finish.

Other

More information is in The Wood Database.


About this site
Disclaimer : eMail comments to me at OTBookOfKnowledge @ Gmail.com. The process of woodturning involves the use of tools, machinery and materials which could cause injury or be a health hazard unless proper precautions are taken, including the wearing of appropriate protective equipment.